Toshiba 32W1753DB, Руководство по эксплуатации

Страница: 13 / 29

English - 12 -
Switching On/Off
To Switch the TV On
Connect the power cord to a power source such
as a wall socket (220-240V AC, 50 Hz).
To switch on the TV from standby mode either:
• Press the Standby button, Pro/- or
a numeric button on the remote control.
• Press the side function switch on the TV until
the TV comes on from standby.
To Switch the TV Off
Press the Standby button on the remote control
or press the side function switch on the TV until
the TV switches into standby mode.
To power down the TV completely, unplug the
power cord from the mains socket.
Note:
When the TV is switched into standby mode, the
standby LED can blink to indicate that features such as
Standby Search, Over Air Download or Timer is active.
The LED can also blink when you switch on the TV from
standby mode.
First Time Installation
When turned on for the first time, the language
selection screen is displayed. Select the desired
language and press
OK
.
On the next screen, set your preferences using
the directional buttons.
Note: Depending on the Country selection you may be
asked to set and confirm a PIN at this point. The selected
PIN cannot be 0000. You have to enter it if you are asked
to enter a PIN for any menu operation later.
About Selecting Broadcast Type
Digital Aerial: If Digital Aerial broadcast search
option is turned on, the TV will search for digital
terrestrial broadcasts after other initial settings
are completed.
Digital Cable: If Digital Cable broadcast search
option is turned on, the TV will search for digital
cable broadcasts after other initial settings are
completed. According to your other preferences
a confirmation message may be displayed before
starting to search. Select YES and press OK to
proceed. To cancel operation, select NO and
press OK . You can select Network or set values
such as Frequency , Network ID and Search
Step . When finished, press OK button.
Note: Searching duration will change depending on the
selected Search Step .
Analogue: If Analogue broadcast search
option is turned on, the TV will search for
analogue broadcasts after other initial settings
are completed.
Additionally you can set a broadcast type as your
favourite one. Priority will be given to the selected
broadcast type during the search process and
the channels of it will be listed on the top of
the Channel List . When finished, press OK to
continue.
You can activate
Store Mode option at this point.
This option will configure your TV’s settings for
store environment and depending on the TV
model being used, the supported features of it
may be displayed on the top of the screen as
an info banner. This option is intended only for
store use. It is recommended to select Home
Mode for home use. This option will be available
in
System>Settings>More
menu and can be
turned off/on later.
Press
OK
button on the remote control to
continue.After the initial settings are completed
TV will start to search for available broadcasts
of the selected broadcast types.
After all the available stations are stored, scan
results will be displayed. Press OK to continue.
The Edit Channel List menu will be displayed
next. You can edit the channel list according to
your preferences or press the Menu button to
quit and watch TV.
While the search continues a message may
appear, asking whether you want to sort channels
according to the LCN (*) . Select Yes and press
OK to confirm .
(*)
LCN is the Logical Channel Number system that
organizes available broadcasts in accordance with a
recognizable channel number sequence (if available).
Note: Do not turn off the TV while initializing first time
installation. Note that, some options may not be available
depending on the country selection.
Media Playback via USB Input
You can connect 2.5” and 3.5” inch (hdd with external
power supply) external hard disk drives or USB memory
stick to your TV by using the USB inputs of the TV.
IMPORTANT! Back up the files on your storage
devices before connecting them to the TV.
Manufacturer will not be responsible for any
file damage or data loss. Certain types of USB
devices (e.g. MP3 Players) or USB hard disk
drives/memory sticks may not be compatible with
this TV. The TV supports FAT32 and NTFS disk