Toshiba 32P2300 Series, Руководство пользователя

Страница: 16 / 34

Resetting the Picture Settings
• Use the menus: PICTURE and Picture Settings
• Use the item: Reset (select Yes and press OK )
Activating the Noise Reduction (NR)
If the receiving signal of MPEG is a mosquito
(grained) noise depending on the compression and
conversion, the picture is weak and the picture is
blurry, the picture may be improved when using this
function.
• Use the menus: PICTURE , Picture Settings and
Noise Reduction
• Use the items: Auto Clean , MPEG NR and DNR
• Use the modes: Low , Middle , High and Off
Adjusting the Colour Management
You can adjust the picture colour quality by
selecting from 6 base colour adjustments :
Red ,
Green , Blue , Yellow , Magenta or Cyan .
• Use the menus: PICTURE , 3D Colour
Management (On) and Base Colour Adjustment
• Use the items: Hue , Saturation and Brightness
Resetting the Base Colour Adjustment
• Use the menus: PICTURE , 3D Colour
Management (On) and Base Colour Adjustment
• Use the item: Reset
Using the Active Backlight Control
In order to improve screen visibility, the Active
Backlight Control sets the screen brightness
automatically during dark scenes.
• Use the menu: PICTURE
• Use the item: Active Backlight Control
Sound adjustment
Setting the MTS (Multi-channel TV Sound)
Auto mode
The MTS Auto mode automatically recognize
stereo/bilingual programmes depending on the
broadcast signal.
Mono mode
If you experience noise or poor reception of any
stereo/bilingual programme, set the
MTS mode to
Mono .
Noise will be reduced and reception may improve.
• Use the menu: SOUND
• Use the item: MTS
Note:
If you experience noise with a particular programme
on whose channel reception is usually good, try setting
MTS mode to
Auto , then press
s
to switch to
e
Mono (monaural).
Selecting the Dual 1 or Dual 2 mode
You can hear only Dual 1 or Dual 2 sound selected,
whenever bilingual programmes are received.
• Use the menu: SOUND
• Use the item: Dual
Notes:
• When the MTS setting is in Mono mode, the Dual
menu is not selectable.
• The Dual menu setting status remains even if the TV
is turned off .
Selecting the stereo programmes
When a stereo programme is received,
d
Stereo
appears and press
s
.
• Use the modes: Stereo and Mono
Selecting the bilingual programmes
When a bilingual programme is received,
j
Dual
appears and press
s
.
Display
Sound to be heard
NICAM
German stereo/
bilingual broadcast
j
Dual 1 Sub
I
sound Main sound
J
Dual 2 Sub
II
sound Sub sound
e
Mono
Main sound —
Note:
These settings are not stored in the TV memory.
Selecting the monaural programmes
If sound distortion, interruptions or silence arises in
the low sound volume level, setting the
e
Mono 2
mode will mitigate the problem.
When a monaural programme is received,
e
Mono
appears and press
s
.
• Use the modes: Mono 1 and Mono 2
Note:
On some cases, the reception of stereo/bilingual
broadcasts may not be possible after switching on the
e
Mono 2 mode.
Adjusting the sound Balance
• Use the menu: SOUND and Balance
• Use the button:

and

Using the Sound Mode
Choose your preferred Sound Mode.
• Use the menu: SOUND , Advanced Sound
Settings
• Use the item: Sound Mode
• Use the modes: Dynamic , Natural and Clear
Voice
– 15 –
32P2300Series̲EN.indd 15 32P2300Series̲EN.indd 15 2013/03/19 19:43:41 2013/03/19 19:43:41