Turning the TV on
Switching on the TV
Connect the power cord to a wall outlet, the
!
power indicator lights in red (standby mode).
1
Press
1
on the remote control or
!
on the TV
left side panel, the
!
power indicator lights
in green.
NOTE:
If you watch black and white programmes when the
Colour System
mode is set to “
A”
(
Automatic
), colour
noise may appear on the screen. In this case select the
appropriate
Colour System
(For the system of each
country or region, refer to pages 11, 29).
Switching off the TV
1
Press
1
on the remote control or
!
on the TV
left side panel to switch to the standby mode.
NOTE:
•
When the TV will not be used for a long period of
time, such as during vacation or travel, remove the
power plug from the wall outlet.
•
The TV will automatically turn off in 15 minutes
based on
No Signal Power Down
settings (
-
page 18) if no signal is detected.
The TV will automatically turn itself off after
approximately 2 hours if you do not operate the TV
after turned on by on timer function.
•
If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If power
is going to be off for a long time and you are going
to be away from your TV, unplug the power cord to
prevent the TV from turning on in your absence.
Tuning the TV for the fi rst time
Before switching on the TV, put your decoder and
media recorder to standby, if they are connected,
and ensure that the aerial is connected. To setup
the TV, use the buttons on the remote control as
detailed on page 8.
1
Press the
1
button. The
Quick Setup
screen
will appear. This screen will appear the fi rst time
that the TV is switched on.
Quick Setup
Menu Language
English
2
Press
or
to select the menu language.
3
Press
OK
, to display the
Location
menu.
Press
or
to select
Store
or
Home
. For
normal home use, select
Home
.
You can select either
Home
or
Store
mode.
Home
is recommended for normal home use.
Select
Store
when using a TV for displaying in
a shop, etc.
Location
Home
To use the TV for displaying in a store showroom, please select
[Store]. [Home] mode is recommended for normal use.
Store mode:
•
A confi rmation menu will appear.
• Intelligent Auto View
(or
AutoView
:
32P2400 Series / 32L2400 Series) menu is not
available.
4
Press
OK
to display the
Intelligent Auto View
(or
AutoView
: 32P2400 Series / 32L2400 Series)
menu (
-
page 15).
Press
or
to select
Yes
or
No
.
•
When you select
No
, skip to step 5.
5
Press
OK
to display the
Ambient Type
menu.
Press
or
to select
Fluorescent Light
or
Light Bulb
.
•
Set the ambient light environment to help
Intelligent Auto View
(or
AutoView
:
32P2400 Series / 32L2400 Series) function
more eff ectively (
-
page 16).
Ambient Type
Flourescent Light
To use the TV under the bluish lighting environment,
please select [Flourescent Light].
To use the TV under the orangish lighting
environment, please select [Light Bulb].
6
Press
OK
to display the
Auto Tuning
menu, and
then
or
to select
On
or
Off
.
Auto Tuning
Auto Signal Booster
Start Scan
On
7
Select
Start Scan
and press
OK
to start the
automatic search.
Auto Tuning
1%
0
Progress
Found
When the automatic search is completed,
the TV will automatically appear the
Manual
Tuning
menu.
– 10 –
Содержание 32L2400 Series
Страница 32: ......
