Toshiba 32AV503, Руководство пользователя

Страница: 10 / 56

10
SETTING UP
Using the controls
Whilst all the necessary adjustments and controls for the television are made using the remote control, the
buttons on the television may be used for some functions
.
If the RED LED is unlit check that the mains plug is connected
to the power supply. If the picture does not appear press
1
on
the remote control, it may take a few moments.
To put the television into Standby press
1
on the remote
control, the GREEN active standby LED will appear ( see
‘Software Upgrade’ section ) next to the RED for a few moments
then disappear. To view the television press
1
again. The
picture may take a few seconds to appear.
Press
M
on the remote control to see the menus.
In digital mode the menu bar at the top of the screens will
show three different topics shown in symbols. As each symbol
is selected by pressing the
I
or
i
button on the remote control,
its respective options will appear below.
In analogue mode the menu appears as a list of five topics.
As each symbol is selected by pressing
I
or
i
on the navigation
ring on the remote control, its respective options will appear
below.
To use the options press the
U
and
u
button on the remote
control to move up and down through them and
Q
,
I
or
i
to
select the required choice. Follow the on-screen instructions.
The functions of each menu are described in detail throughout
the manual.
To alter the volume press –
2
+.
To alter the programme position press
b p B
.
Press MENU and
I
,
i
,
U
or
u
to control the sound and picture
options.
Press MENU to finish.
To select the external input, press
o
until the appropriate
input source is selected as described on page 31 .
Please always refer to the owner’s manual of the equipment to
be connected for full details.
Please note: Inserting the headphone plug will mute the sound
from all speakers.
Standby RED LED – Standby
GREEN LED – Power on
Headphone jack
GREEN LED - Active standby ( digital only)
COMMON INTERFACE
The Common Interface
is for a Conditional
Access Module (CAM).
Contact a service
provider.
Switching on
Using the remote control
Using the controls
00GB_AV505D_EngOM.book Page 10 Wednesday, November 28, 2007 2:36 PM