25
Defining your INPUT and OUTPUT sockets so that your television recognises connected equipment.
AV connections and input selection
Most video recorders and decoders send a signal through
the Scart lead to switch the TV to the correct
Input
socket.
Alternatively press the external source selection button
B
repeatedly until you see the picture from your equipment.
You must use this button to view equipment connected using
the COMPONENT VIDEO INPUT (
EXT 4
).
Digital Audio
on the screen indicates that the external
source has been set as a digital audio input,
see below
. An
S
e.g.
EXT2S
, indicates the input is set for an S-Video signal.
SELECTING THE DIGITAL AUDIO SIGNAL
2
1
Input Selection
This set is provided with 2 digital audio inputs – DA-1
and DA-2 – so that, for example, a DVD player and a
games console can stay permanently connected.
Having connected the video signal from your DVD to, say,
COMPONENT VIDEO INPUT (
EXT4
) and from your
games console to Scart 3 (
EXT3
) you will now need to
connect the audio cables to the inputs on the back of the
set, then match the two up.
If you have connected to
DA-1
(optical), select
AV
connection
from the
Feature menu
and press the
Q
button to highlight
Digital input-1
then with
the
S
or
R
buttons, select the appropriate video
input, for example
EXT 4
for the DVD player.
AV connection
Back
Digital input-1
EXT 4
Digital input-2
EXT 3
EXT2 input
AV
EXT3 input
S-VIDEO
EXT2 output
EXT 1
Woofer
EXT.
Then for the 2nd connection, press the
Q
button to
highlight
Digital input-2
(coaxial) then with the
S
or
R
buttons, select the appropriate video input,
for example,
EXT 3
for the games console.
Again, from the
Feature menu
select
AV connection
.
With
S
or
R
change the
EXT2 output
option to:
2
1
Selecting the
INPUT
signal
This feature allows you to specify the type of signal going
into Scarts 2 (
EXT 2
) or 3 (
EXT 3
) on the back of the
television and the sockets on the front (which are also
EXT 3
). Please refer to the manufacturers’ instructions for
the connected equipment.
1
From the
Feature menu
select
AV connection
and
with the
S
or
R
button select either
AV
or
S-VIDEO
as the required
input
for
EXT2
and
EXT3
.
If the colour is missing try the alternative setting.
This feature enables you to select the source to
output
from Scart 2.
e.g.
If you connect a stereo decoder to Scart
1 and a stereo video recorder to Scart 2, and select
EXT 1
as the
EXT2
output (
i.e.
you will output the signal received
through Scart 1 directly out to Scart 2), you will be able to
record the stereo decoder transmission in stereo.
AV connection
Back
Digital input-1
EXT 4
Digital input-2
EXT 3
EXT2 input
AV
EXT3 input
S-VIDEO
EXT2 output
EXT 1
Woofer
EXT.
AV connection
Back
Digital input-1
EXT 4
Digital input-2
EXT 3
EXT2 input
AV
EXT3 input
S-VIDEO
EXT2 output
EXT 1
VCR sync Timer
OFF
Selecting the
OUTPUT
signal for Scart 2
Monitor
= The picture on screen.
TV
= The
last
television programme selected –
digital
or
analogue
.
DTV
= The most recent
digital
programme selected.
ATV
= The most recent
analogue
programme selected.
EXT 1
= The picture from equipment connected to Scart 1.
EXT 3
= The picture from equipment connected to Scart 3 or
the front input sockets.
Please see page 37
for a clear view of the
back connection
recommendations…
ADDITIONAL FEATURES
