Stereo and Bilingual transmissions
If Stereo or Dual language broadcasts are transmitted the
word Stereo or Dual will appear on the screen,
disappearing after a few seconds. The display will
reappear each time you change programme positions,
provided that the broadcast is in stereo. If the broadcast is
not in stereo the word Mono will appear.
Stereo...
Choose the required programme number.
Press the
O
I/II
button repeatedly, to select between
Stereo
and
Mono
.
Bilingual...
Bilingual transmissions are rare. If they
are
transmitted the word
Dual
will display. Choose the
required programme number and if the word
Dual
does
appear press the
O
I/II
button to select between
Dual 1
,
Dual 2
and
Mono
.
1
From the
Feature menu
select
Panel lock
and
choose
On
or
Off
with the
z
or
x
button.
With
Panel lock On
, once the TV has been turned off using the
ON/OFF button on the front/side of the TV, the TV can only be
viewed again after switching on with the ON/OFF button and
then pressing the Standby button
i
on the remote control.
EXIT
: To exit
Panel Lock
Vertical position
Vertical size
Panel lock
Off
Automatic format
Off
ADDITIONAL FEATURES
15
The timer, time display, panel lock,
stereo/bilingual transmissions
The Timer
The time display facility allows you to see the current time
on the TV screen.
If you press the
t
button on the remote control
whilst watching a normal TV broadcast, you will see a
time display from the broadcaster. It will remain on the
screen for about 5 seconds.
The Time Display
Select the
Timer
option from the top menu bar.
Select the
On timer
(or the
Off timer
). If, for
example, you want the TV to turn ON (or OFF) in
one and a half hours time, enter 01:30 using the
numbered buttons or the
x
and
z
buttons to
increase/decrease in steps of 30 minutes.
When setting the
On timer
, you must enter the
programme position number you want to watch.
You must put the set into Standby mode by
pressing the
i
button.
Any equipment connected with Scart leads must
also be put into Standby mode to prevent them
being displayed when the timer switches on.
When the
On timer
has been set, the GREEN On
timer indicator on the front of the TV will be lit
(
see page 5
)
.
If the
On timer
has been set, you do not have to
wait to watch the television. Y
ou can bring the set
back to life by pressing the
i
button. However,
the GREEN timer light will stay on until the set
time period has passed, at which point the TV
will go to the chosen channel.
1
2
3
4
You can tell the TV to turn itself
ON
or
OFF
after a
certain time.
To cancel the
On timer
, enter zero in each
position including the programme position.
Timer
0-9 :
To
set
EXIT
: To exit
Off timer
00:00
On timer
00:00 P02
When the
Off timer
is set and there is one minute left
before the TV will turn
off
a reminder will show on screen
e.g.
Off timer
/
59
means there are 59 seconds left.
To turn the TV back on, press the
i
or a number button
on the remote control.
Panel lock
allows you to disable the buttons on the
front/side of the TV set so that channels cannot be changed.
You can though, still use the buttons on the remote control.
