2460 ADJUSTMENT
1 - 30
September 1997 © TOSHIBA CORP.
< Adjustment procedure >
(1) Make a test print as in the following procedure.
(2) Measure the distance “D” which is the distance to the 6th line from the leading edge of the
test print paper.
1
0
5
1
d) Registration
< Adjustment order >
(3) In order to set the distance “D” to 52 mm, adjust as follows.
1
Notes 1. An increase in the value corresponds to a decrease in the distance “D” (0.5 mm/step).
2. In order to make a test print, make sure the message indicates [ 100 %
A ]
after the INT key is pressed.
3. Adjustment value is able to be input within the range of 0 ~ 15. Default adjustment
value is 8.
In case of the lower cassette feeding (Code “441”), adjustment value is within the
range of 0~40 (Default adjustment value is 13).
4. Since the lower cassette adjustment value becomes a standard for all adjustments,
this adjustment must always be performed in the order stated above.
Print movement direction
FAX
Code
Set the value
INT
FAX
1
START
D
Copier cassette
Lower
Upper
(441)
(440)
LCF
(443)
PFP
(444)
ADU
(445)
A
A
A
A
Bypass
(442)
PWR
