September 1997 © TOSHIBA CORP.
1 - 29
2460 ADJUSTMENT
4
2
1
1
c) Main motor speed fine adjustment (Secondary scanning reproduction ratio of the printer
unit)
(1) Make a test print as in the following procedure.
(2) Measure the distance “C” which is the distance between the 5th line and 15th line from the
leading edge of the test print paper.
0
5
1
(3) In order to set the distance “C” to 100 mm, adjust as follows.
1
Notes 1. An increase in the value lengthen the distance “C” (0.0315 %/step).
2. In order to make a test print, make sure the message indicates [ 100 %
A ]
after the INT key is pressed.
3. Adjustment value is able to be input within the range of 1 ~ 255.
The default adjustment value is 140.
FAX
START
Set the value
INT
1
FAX
Print movement direction
PWR
C