- 22 -
Adjust the required horizontal or vertical po-
sition or Hsync Phase by , buttons.
You can make position adjustment directly
by Auto position.
Select Auto position by or buttons
and press or button.
Wait is displayed at the bottom of the
menu. After a few seconds screen geometry
is adjusted automatically.
Warning:
Auto position adjustment recom-
mended to be done with the full screen im-
age for the proper adjustment.
To store this menu setting select Store by
or buttons and then press
OK
but-
ton, Stored will be displayed for few sec-
onds at the bottom of menu.
Source Menu:
In the Main menu, select
Source
using
or button, then enter the Source menu
pressing , or
OK
buttons.
6RXUFH
Select the available sources of TV, AV-1,
AV-2, AV-3, S-Video or PC by pressing ,
or
OK
buttons.
PIP Source Menu:
This menu is available when the PIP dis-
played.
In the Main menu, select
PIP Source
using
or button, then select the any avail-
able source of TV, AV-1, AV-2, AV-3 or S-
Video pressing , then
OK
buttons.
79
Teletext
Teletext is an information system that dis-
plays text on your TV screen. Using the Tele-
text information system you can view a page
of information on a subject that is available
in the list of contents (index).
On screen display is not available in text
mode.
Contrast, brightness or colour control is not
available, but volume control is available in
text mode.
To operate Teletext
Select a TV station on which Teletext is being
transmitted.
Press (TELETEXT)
button. Usually
the list of contents (index) is displayed on
the screen.
,,
,
To select a page of Teletext
Press the appropriate digit buttons for the
required Teletext page number.
The selected page number is displayed at
the top left corner of the screen. The Teletext
page counter searches until the selected
page number is located, so that the desired
page is displayed on the screen.
,,
,
Press
P/CH +
button to move the Teletext
screen forward one page at a time.
2309W-ENG-1550UK (TOSHIBA UK)-17 INCH TFT.p65
13.05.2004, 18:55
22
