- 20 -
Volume Bar
It is displayed in the lower middle of the
screen. When a volume command is re-
ceived (pressing
+
or
-
by Re-
mote Control or Control panel at the top of
the TV) and no menu is active, it stays on the
screen for 3 seconds, after the last volume
command or until another command is re-
ceived in between.
AV Modes
By pressing the
(;7
button you can switch
your TV to AV modes (except being in Tele-
text). Pressing this button will consecutively
switch the TV in one of the optional AV
modes: AV-1, AV-2, AV-3, S-VIDEO, PC.
In order to quit the AV mode press the
,
digit buttons or
-P/CH
or
P/CH+
.
Signal Out Of Range
When the PC input signal is not supported
by LCD-TFT TV, a message is displayed like
Signal out of range and screen is blanked.
PC MODE
Installation
Power off both Computer and Display before
making any connections.
The monitor comes with a 15-pin PC cable.
Connect end of the signal cable to the 15-
pin connector on the rear of the Computer.
3LQ0LQL'6XE&RQQHFWRU
Tighten the screws of the Display cable until
the connectors are fastened securely (fin-
ger-tighten only).
If you are using Windows operating system
running on a PC with a Microsoft Plug & Play
compatible video card, your system will se-
lect the appropriate timing for your monitor.
Switching from TV to PC
Press
PC
button to switch directly PC
mode.
,,
,
Main Menu in PC mode:
Enter the main menu by pressing the
M
button on the remote control.
Sound Menu
In the main menu select Sound using
or button then enter the Sound menu
pressing , or
OK
buttons.
The items in this menu are described at
Sound menu starting page 10.
6RXQG
2309W-ENG-1550UK (TOSHIBA UK)-17 INCH TFT.p65
13.05.2004, 18:55
20
