Toshiba 22SAV Скачать руководство пользователя страница 4

2

REQUIREMENT OF REPORT TO THE LOCAL POWER SUPPLIER

Please make absolutely sure that the installation of this appliance is reported to the local power supplier before installation. If you experience any problems 
or if the installation is not accepted by the supplier, the service agency will take adequate countermeasures.

CAUTION

•  Exposure of unit to water or other moisture before installation could result in electric shock. Do not store it in a wet basement or expose to rain or water.
•  After unpacking the unit, examine it carefully for possible damage.
•  Do not install in a place that can increase the vibration of the unit. Do not install in a place that can amplify the noise level of the unit or where noise and 

discharged air might disturb neighbors.

•  Please read this installation manual carefully before installing the unit. It contains further important instructions for proper installation.
•  This appliance must be connected to the main power supply by means of a circuit breaker depending on the place where the unit is installed. Failure to do 

so may cause electrical shock. 

•  Follow the instructions in this installation manual to arrange the drain pipe for proper drainage from the unit. Ensure that drained water is discharged. 

Improper drainage can result in water leakage, causing water damage to furniture.

•  Tighten the 

fl

 are nut with a torque wrench using the prescribed method. Do not apply excess torque. Otherwise, the nut may crack after a long period of 

usage and it may cause the leakage of refrigerant.

•  Wear gloves (heavy gloves such as cotton gloves) for installation work. Failure to do so may cause personal injury when handling parts with sharp edges. 
•  Do not touch the air intake section or the aluminum 

fi

 ns of the outdoor unit. It may cause injury. 

•  Do not install the outdoor unit in a place which can be a nest for small animals. Small animals could enter and contact internal electrical parts, causing a 

failure or 

fi

 re.

•  Request the user to keep the place around the unit tidy and clean.
•  Make sure to conduct a trial operation after the installation work, and explain how to use and maintain the unit to the customer in accordance with the 

manual. Ask the customer to keep the operation manual along with the installation manual.

1110651154-EN.indd   2

1110651154-EN.indd   2

2/15/10   9:39:37 AM

2/15/10   9:39:37 AM

Содержание 22SAV













Отзывы: