13
Getting started
Turning on the TV
Switching on the TV
Connect the power cord to a wall outlet, the
power
indicator lights in red (standby mode).
1 Press on the remote control or
on the TV
control panel, the
power indicator lights in green.
Switching off the TV
1 Press on the remote control or
on the TV
control panel to switch to the standby mode.
Notes:
•
This TV is not fully disconnected from the main supply,
as minute current is consumed even when the TV is
turned off. When the TV will not be used for a long
period of time, such as during vacation or travel,
remove the power plug from the wall outlet.
•
If power is cut off while you are viewing the TV,
the Last Mode Memory function turns on the TV
automatically when power is applied again. If power is
going to be off for a long time and you are going to be
away from your TV, unplug the power cord to prevent
the TV from turning on in your absence.
Initial Setup
Before switching on the TV, put your decoder and media
recorder to
Standby
if they are connected and ensure
the antenna is connected. To setup the TV, use the
buttons on the remote control as detailed on page 12.
1 Connect the television to the main power and press
the POWER button. The Initial Setup screen will
appear at the first use. Press
to start the initial
setup.
Initial Setup
Welcome to the initial setup
wizard.
Please press [OK] to start the
wizard.
Welcome
Next
2 Press ▲ or ▼ to select your language and press ►
to the next step.
Initial Setup
Please select your language:
Back
Select
Next
Exit
EXIT
English
Language
中文
Français
3 Press ▲ or ▼ to select the Energy Saving Mode and
press ► to the next step.
Initial Setup
To use this TV for displaying
in a store showroom, please
select [Store].
[Home] mode is recommended
for normal use.
Back
Select
Next
Exit
EXIT
Home
Engrgy Saving Mode
Store
4 Press ▲ or ▼ to select the Province/State and press
► to the next step.
Initial Setup
Province/State
Back
Select
Next
EXIT
New South Wales
Province/State
Queensland
Victoria
Western Australia
Tasmania
Northern Territory
South Australia
Exit
Notes:
•
To ensure your television is operating at optimal
energy efficiency, select
Home
mode during initial
activation.
Home
mode is recommended for normal
home use.
•
The factory default settings of this television meet
ENERGY SAVING
requirements. Changing Picture
Settings may increase energy consumption, possibly
beyond the limits required for ENERGY SAVING
qualification.
•
To return to
Home
mode settings, select
Standard
picture mode.
•
Standard
picture mode is used to achieve published
average power values, and this mode is recommended
for normal home use.
5 To start channel scan, press ►.
Initial Setup
First, please connect
antenna/cable.
Start channel scan now ?
If you skip this step, the
channel scan can be performed
in the TV Menu.
0%
Back
Select
Next
EXIT
Scan
Channel Scan
Skip Scan
Exit
The search will begin for all available stations. The slide
bar will move along the line as the search progresses.
Note:
If you skip this step, the channel scan can still be
performed later in the Setup Menu.
Содержание 22AV700A
Страница 47: ...46 Note Note ...
Страница 48: ......