ENGLISH
- 17 -
For TOP text
TOP text mode of operation will be activated
automatically according to the transmission.
If TOP text transmission is present, colour
coded buttons will appear in status row.
If TOP text transmission is not present, the
status row will not appear.
The subject-heading for information may be
located in a coloured box.
In TOP mode, the
or
commands will
request the next or previous page respectively.
To exit Teletext
Press
button twice or press
EXIT
button
while Teletext mode is active. The screen will
switch to TV mode.
To Display the Time
While watching a TV programme with Teletext
transmission press
button. The current
time information, captured from Teletext will be
displayed
in
the upper middle of the screen.
Press again to remove.
If the programme being watched does not have
Teletext transmission, no information will be
displayed.
Connect Peripheral Equipment
There is a wide range of audio and video equip-
ment that can be connected to your TV.
The following connection diagrams show you
where the different equipment should be con-
nected at the
back or the front side of the TV.
Via the
SCART
Your TV set has
two Scart sockets
. If you want
to connect peripherals (e.g. video, decoder,
etc.) which have
Scarts
, to your
TV
, use
EXT.
inputs
.
If an external device is connected via
Scart
socket
TV is switched to AV mode automati-
cally. If the signal is
RGB
then the
RGB
OSD in-
dicator is displayed on the screen.
RGB mode
If your equipment can output
RGB
signals,
connect it to the
AV-1 (EXT.)
terminal.
Select the
RGB
mode to watch images from that
equipment.
Via Ant Input
If you want to connect to your TV, peripherals
like video recorders or decoders, but the device
you want to connect does not have
Scart
, you
should connect it to the ANT input of your TV set.
If the VCR is connected via antenna input,
we suggest you use Programme 0.
Decoder
Cable TV offers you a wide choice of pro-
grammes. Most of them are free, others are to
be paid for by the viewer. This means that you
will need to subscribe to the broadcasting or-
ganisation whose programmes you wish to
receive. This organisation will supply you a
corresponding decoder unit to allow the pro-
grammes to be unscrambled.
For further information ask your dealer. See
also the booklet supplied with your decoder.
Connect a decoder with an aerial socket to
the TV
Connect the aerial cable.
toshiba ak30_290105.p65
03.02.2005, 09:54
17