37
DVD Playback
Using the
TV/DVD’
s Features
Setting up
your TV/DVD
Connecting
your TV/DVD
Introduction
Appendix
DVD Playback
Playing a disc
This section shows you the basics on how to play a disc.
Basic playback
DVD
VCD
CD
Preparations:
When connecting to other equipment, turn the power off.
1. Press
POWER
on the unit or on the remote control to turn on the
unit.
The Power indicator will light.
• When using an amplifier, switch on the amplifier.
2. Press
DVD
on the remote control to select DVD mode.
The DVD startup screen will appear on the screen. (If DVD disc
has already loaded, playback will start automatically.)
3. Load a disc in the disc slot with the
label side facing forward. (If the disc
has a label.) Hold the disc without
touching either of its surfaces, align it
with the guides and place it in position.
4. On the TV screen, “Open” changes to “Loading” and then
playback commences.
• A menu screen will appear on the TV screen if the disc has a
menu feature.
Press
/ or / to select title, then press
OK
. Title is
selected and play commences.
5. Press
VOL +
or
–
to adjust the volume.
6. Press
STOP
to end playback.
Resume feature
• Depending on the disc you are playing, when you press
STOP
once,
the TV/DVD remembers the scene that was playing (“Press
to continue” appears on screen). Press
PLAY/PAUSE
to resume
playback from the stopped scene.
• If you press
STOP
again, the unit will clear the stopped scene (only
“
Ŗ
” will appear on screen).
VOLUME
10
Note:
Static electricity may affect the TV/DVD’s
operation and cause it not to work properly. If
this happens, turn OFF the POWER,
disconnect and then reconnect the AC power
cord, and turn ON the unit again.
CAUTION
Keep your fingers well clear of the disc slot
w h e n d i s c i s l o a d i n g o r u n l o a d i n g .
Neglecting to do so may cause serious
personal injury.
Open
Loading
DVD Playback
Using the
TV/DVD’
s Features
POWER
PLAY/PAUSE
STOP
OK
VOL +/–
DVD
Содержание 20SLD1
Страница 62: ...Appendix 62 MEMO ...
