background image

5

29) Always unplug the TV before 

cleaning. Wipe the display 
panel surface gently using 
only a soft cloth (cotton, 
flannel, etc.). A hard cloth 
may damage the surface of 
the panel. Avoid contact with 
alcohol, thinner, benzene, acidic or alkaline solvent 
cleaners, abrasive cleaners, or chemical cloths, which 
may damage the surface. Do not spray volatile 
compounds such as insecticide on the cabinet. This may 
cause a discoloration or damage the cabinet.

30)

WARNING: RISK OF ELECTRIC SHOCK!

 

Never spill liquids or push objects of any 
kind into the TV cabinet slots.

31) While it is thundering, do not touch the connecting 

cables or apparatus. Failure to follow this instruction 
may result in electric shock.

32) For added protection of your TV from lightning and 

power surges, always unplug the power cord and 
disconnect the antenna from the TV if you leave the TV 
unattended or unused for long periods of time.

33) During normal use, the TV may make occasional 

snapping or popping sounds. This is normal, especially 
when the unit is being turned on or off. If these sounds 
become frequent or continuous, unplug the power cord 
and contact a Toshiba Authorized Service Center.

34)

Never strike the screen with a sharp or heavy object.

35) The LCD screen of this product can be damaged by 

Ultraviolet Radiation from the sun. When selecting a 
location for the television, avoid locations where the 
screen may be exposed to direct sunlight, such as in 
front of a window.
Never touch, press, or place anything on the LCD 
screen. These actions will damage the LCD screen. If 
you need to clean the LCD screen, follow the 
instructions in item 

29

 on 

page 5

.

Service

36)

WARNING: RISK OF ELECTRIC SHOCK!

 

Never attempt to service the TV yourself. 
Opening and removing the covers may 
expose you to dangerous voltage or other 
hazards. Refer all servicing to a Toshiba Authorized 
Service Center.

37) If you have the TV serviced:

• Ask the service technician to use only replacement 

parts specified by the manufacturer.

• Upon completion of service, ask the service 

technician to perform routine safety checks to 
determine that the TV is in safe operating condition.

38) The cold cathode fluorescent lamp in the LCD panel 

contains a small amount of mercury.
When the TV reaches the end of its useful life, dispose 
of the used TV by the approved method for your area, or 
ask a qualified service technician to properly dispose of 
the TV.

Important notes about your 

LCD TV

The following symptoms are technical limitations of LCD 
Display technology and are not an indication of malfunction. 
Therefore, TACP/TCL is not responsible for perceived defects 
resulting from these symptoms.

1)

An afterimage (ghost) may appear on the screen if a 
fixed non-moving image is displayed for a long period 
of time. The afterimage is not permanent and will 
disappear in a short period of time.

2)

The LCD panel contained in this TV is manufactured 
using an extremely high level of precision technology; 
however, there may be an occasional pixel (dot of light) 
that does not operate properly (that does not light, t

hat 

remains constantly lit, etc.). This is a structural 
property of LCD technology, is not a sign of 
malfunction, and is not covered under your 
warranty. Such pixels are not visible when the 
picture is viewed from a normal viewing distance.

Note:

 Interactive video games that involve shooting a 

"gun" type of joystick at an on-screen target may not 
work on this TV.

WARNING: RISK OF

 

SERIOUS PERSONAL                   
INJURY OR 
EQUIPMENT DAMAGE!

Note:

 The lamp unit contains mercury, the 

disposal of which may be regulated due to

 

environmental considerations. For disposal

 

or recycling information, contact your local 

authorities or the Electronics Industries Alliance 
(www.eiae.org).

WARNING: Do not 
swallow the battery.

No eating!

Содержание 20DL76












































Отзывы: