DISASSEMBLY INSTRUCTIONS
B1-2
PLATE JACK-SIDE/SHIELD JACK-SIDE and PLATE
JACK-1 (Refer to Fig. 1-7)
1.
2.
3.
4.
5.
6.
7.
8.
Remove the 2 screws (1).
Remove the 2 screws (2).
Remove the Plate Jack-Side in the direction of arrow (A).
Remove the screw (3).
Remove the Shield Jack-Side in the direction of arrow (B).
Remove the 2 screws (4).
Remove the screw (5).
Remove the Plate Jack-1 in the direction of arrow (C).
1-5: ANGLE DVD ASS'Y (Refer to Fig. 1-5)
1-5: ANGLE DVD ASS'Y (Refer to Fig. 1-5)
1-5: ANGLE DVD ASS'Y (Refer to Fig. 1-5)
1-5: ANGLE DVD ASS'Y (Refer to Fig. 1-5)
1-5: ANGLE DVD ASS'Y (Refer to Fig. 1-5)
1.
2.
3.
Disconnect the following connectors:
(CP506 and CP701).
Remove the 5 screws (1).
Remove the Angle DVD Ass'y in the direction of arrow.
Fig. 1-5
Angle DVD Ass'y
(1)
CP506
(1)
(1)
(1)
(1)
CP701
1-6: DVD DECK (Refer to Fig. 1-6)
1.
2.
3.
4.
5.
6.
Short circuit the position shown in Fig. 1-6 using a
soldering iron. If you remove the DVD Deck with no
soldering, the Laser may be damaged.
Remove the 4 screws (1).
Disconnect the following connectors:
(CP2301, CP2302 and CP2303).
Remove the DVD MT PCB in the direction of arrow (A).
Remove the 4 screws (2).
Remove the DVD Deck in the direction of arrow (B).
Fig. 1-6
Pick Up PCB
DVD Deck
(1)
(A)
2
Short circuit using a
soldering iron.
CP2303
CP2302
CP2301
(B)
(1)
(1)
(1)
(2)
(2)
(2)
(2)
NOTE
Before your operation, please read "PREPARATION OF
SERVICING"
Use the Lead Free solder.
Manual soldering conditions
• Soldering temperature: 320 ± 20
o
C
• Soldering time: Within 3 seconds
• Soldering combination: Sn-3.0Ag-0.5Cu
When Soldering/Removing of solder, use the drawing
equipment over the Pick Up Unit to keep the Flux smoke
away from it.
When installing the DVD Deck, remove all the soldering on
the short circuit position after the connection of Pick Up
PCB and DVD MT PCB connector.
1.
2.
3.
4.
5.
Angle DVD Ass'y
Fig. 1-7
Plate Jack-1
Shield Jack-Side
Plate Jack-Side
(1)
(1)
(2)
(2)
(3)
(A)
(B)
(4) (4)
(5)
(C)
DVD MT PCB
1-7:
Содержание 15DLV77B
Страница 5: ...TOSHIBA CORPORATION 1 1 SHIBAURA 1 CHOME MINATO KU TOKYO 105 8001 JAPAN ...
Страница 74: ...MECHANICAL EXPLODED VIEW PACKING DIAGRAM J1 3 128 128 129 126 127 127 130 131 132 133 134 135 TM101 ...
Страница 86: ...TOSHIBA CORPORATION 1 1 SHIBAURA 1 CHOME MINATO KU TOKYO 105 8001 JAPAN ...