Toshiba 15DL72, Руководство по обслуживанию

Страница: 7 / 57

1-1
SECTION 1
ADJUSTMENT PROCEDURES AND PART
REPLACEMENT
1. REMOVAL
1-1. Front Panel
1. Remove five screws (1).
Fig. 1-1-1
2. Place the main unit horizontally (similar to use when
hanging on wall), insert finger from the inner side (2)
and release the front panel (2) claws in order from the
bottom (arrow A) (there are eleven peripheral claws).
Fig. 1-1-2
Note:
• A "snapping" sound will be heard when the claw is
released.
• Take care not to scratch the LCD.
• Caution should be taken to avoid injury from edges on
metal areas when removing the LCD panel.
• Return the wiring to their original positions during
assembly and take care not to get wires caught in the
front panel.
1-2. LCD Panel
1. Remove four screws (1).
Fig. 1-1-3
2. Lift the LCD panel (2) up and remove the connector
(3) from back.
Screws (1)
A
A
LCD rear panel
Front panel (2) LCD
Front panel (2)
LCD
Claw
Claw
LCD panel (2)
Screw (1)
Screw (1)
Screws (1)
GND lead wire
GND lead wire
Fig. 1-1-4
Rear side of
the LCD panel (2)
Connector (3)
Be careful not to damage
the inverter PC board holder.