background image

42

Getting Started

Selecting a place to work

5.375 x 8.375 ver 2.3

If you are using a conventional chair:

Your knees should be slightly higher than your hips. If 
necessary, use a footrest to raise the level of your knees 
and ease the pressure on the back of your thighs.

Adjust the back of your chair so that it supports the lower 
curve of your spine. If necessary, use a cushion to provide 
extra back support. Lower-back-support cushions are 
available at many office supply stores.

Sit with your back straight so that your knees, hips, and 
elbows form approximately 90-degree angles when you 
work. Do not slump forward or lean back too far.

Lighting 

Proper lighting can improve the visibility of the display and 
reduce eyestrain.

Position the display panel or external monitor so that 
sunlight or bright indoor lighting does not reflect off the 
screen. Use tinted windows or shades to reduce glare.

Avoid placing your computer in front of a bright light that 
could shine directly in your eyes.

If possible, use soft, indirect lighting in your computer 
work area.

Arms and wrists

Avoid bending, arching, or twisting your wrists. Keep 
them in a relaxed, neutral position while typing.

Содержание 1130-S155





















































































































































































































































Отзывы: