Torus Power WM 40 BAL AVR-2 ELITE, Руководство пользователя

Страница: 22 / 38

19 | P a g e
System Setup
Delay Time Between Zones (Scheduler
and Start UP):
Select a delay interval time (1 to 999 seconds)
for sequential Power ON and OFF between
zones.
Schedule:
By checking this button the output zones will
follow the defined schedules for turning power
on or off. (see Schedule Management)
Front Panel Display:
There are 3 modes for the front panel display;
•
Always ON (default setting)
•
Dim after delay time (10-255 seconds)
expires
•
Turn off after delay time (10-255 seconds)
expires
Zone R/Router Reset:
User has the option to assign Zone R (individual zone located at rear panel) to act as an
additional output zone or to be used for automatic router reboot.
Unchecked Zone R/Router Reset:
• Zone R will act like a regular zone, and can be programmed to switch ON/OFF individually
like other zones. (see page 8, Zone Power Control)
• Zone R works with the Schedule Manager and can be programmed to turn ON/OFF at any
time on any day of the week like other zones. (see page 10, Scheduling Management)
• Zone R operates with other zones during sequential start-up.
Checked Zone R/Router Reset:
• Zone R can only be used for router and/or modems.
• The Auto reboot feature initiates power cycling of the router or modem when internet
connection is down. The system will reset Zone R up to three times with adjustable time
intervals between each attempt.
• Zone R can no longer be individually turned OFF/ON through Zone Power Control.
• Zone R will disappear in the Zone Power Control section.
• Zone R can no longer be scheduled or sequenced to turn ON/OFF.
When you have made your selection, press SAVE SETUP .