34
WLABEL Series
The Adhoc <Hot Spot> connection
is made between the scale, and a mobile device in the
absence of modem.
13.2.1.- WIFI CONNECTION CONFIGURATION.
(Only for Scales with WIFI Connectivity Available).
1.- Follow section 13th steps and then select WIFI by pressing ENTER.
2- Wait a few seconds while the scale configures this option and
saves changes, once it ends it goes automatically into the “Look for
network” option but if you wish you can use the arrow keys to select
for advance settings.
2.1- Once you’re into this option and press ENTER the scale will start
looking for a network available around it. Once it finishes looking it
will make a Beep sound to
advice you of the result list on the screen
which you can look for the network with the arrow keys.
