8). TEXT will appear again. Arrow down until you see SIZE (1-6). Press ENTER.
9). Press DEL. Enter the font size you want. (1=smallest 5=largest). Press ENTER.
NOTE: The larger you make the font, the more space is used on the label. Also less
characters will appear on label. LINE 1 recommended size is 2.
10). Press Arrow down. POSITION will appear. Press ENTER.
11). By using the arrow buttons, you can select if you want the text to be centered on
the label, or start left or right on the label. Press ENTER when selected.
12). Press ESC once. Arrow down to the second line (LINE 2). Press ENTER.
Repeat lines 5 to 11 to edit.
Page 15
NOTE: You can have up to 10 lines printed on the label. It is recommended no
more than 2 lines used so all other text can be printed. Too much text will go past
the end of the label causing another label to be used. You can correct this by making
font sizes smaller, using less text lines, or using longer labels.
TO SET AMOUNT OF TEXT LINES TO BE PRINTED:
1). Press ESC until HEADLINES appear. Press ENTER.
2). LINE 1 appears. Press arrow down until # LINES appear. Press ENTER.
3). Press DEL. Type in the amount of text lines you want printed (how many
HEALINES you typed in). Press ENTER.
4). Press ESC until PROGRAMMING MODE appears. Your store information is
now programmed in the scales memory. It will appear at the top of a label each time
you print.
EDIT SCROLLING MESSAGE:
This is the message that scrolls across the lower window of the display when the
scale is idle (not being used). This can be your store name, a special of the day, etc.
1). Enter PROGRAMMING MODE.
2). Press EDIT SCROLLING MESSAGE key.
