SCALE MASTER allows you to add new scales to the network. You will have to
add each scale to the network one at a time. As long as you use the same computer
each time you communicate to your network, you should not have to add them
again.
TO ADD A NEW SCALE TO THE NETWORK:
1). Click on NEW.
Page 9
2). Go to the first IP box and click in it. Enter the first number. Press TAB and enter
the second number. Repeat for the last two numbers.
3). Click on SEARCH FOR SCALES. If the network detects the scale, it will ask you
‘Do you want to add scale?’. Click YES.
4). The scales information should appear on the screen. If you have more than one
scale, repeat step 1.
NOTE: If you get a Enable message, the network did not find the scale. Either you
entered the wrong IP address, or the network is not configured correctly. If you
have more than one network configured, you may have to disable the other
networks.
CONFIGURE GENERAL PARAMETERS:
To set up for North America (USA) operations and currency, on the top of the
screen click on PARAMETER and then SYSTEM COFIGURATION.
1). Under the COMPANY INFORMATION tab, enter your stores information.
2). Under the SYSTEM DATA tab, enter the following information:
Current Symbol = $
Decimal Symbol = .
Decimal Number= 2
3). Click on SAVE the CLOSE.
