Torqeedo Cruise 2.0 S, Руководство по эксплуатации, Страница: 12 / 32

12
Operating manual Cruise 2.0
8. Starting up
8.1 Fitting the drive onto the boat
• Only operate the gas spring tilt mechanism when the motor is mounted
roughly vertically. Otherwise, the strong pre-tension of the gas pressure
springs will cause the tilt mechanism to flip up rapidly. This can cause
serious injury. On delivery from the manufacturer, the tilt mechanism
release lever is secured with a cable binder. We recommend securing
the release lever again when you transport or store the motor.
• Do not reach into the opening on top of the transom mount. If you do
so, this can cause squashing when the tilt mechanism is activated.
The opening is marked with a safety sticker.
• Make sure the tilt mechanism audibly clicks into place when you fold it
down.
1. Remove the parts that belong to the Cruise supply
scope from the packaging.
2. Put the tiller handle on the tiller. Make sure you align
the opening button on the tiller with the recesses in
the tiller handle. The opening button must click into
place audibly.
. Fit the drive onto the transom or the
motor bracket of your boat and
securely tighten the two capstan-head
screws.
4. Several steps are necessary to set the
motor at a right angle to the water
surface (trimming):