Toro Z Master Commercial 2000 74141TE, Руководство оператора

Страница: 27 / 60

Maintenance
Recommended Maintenance Schedule(s)
Maintenance Service
Interval
Maintenance Procedure
After the first 8 hours
• Change the engine oil.
After the first 50 hours
• Change the hydraulic system filter and oil.
Before each use or daily
• Check the safety system.
• Check the engine oil level.
• Check the seat belt.
• Check the rollover protection system (ROPS) knobs.
• Clean the engine screen.
• Check the mower blades.
• Clean the mower deck.
Every 25 hours
• Check the hydraulic oil level in the expansion tank.
Every 50 hours
• Grease the mower deck idler arm.
• Check spark arrester (if equipped).
• Check the tire pressure.
• Inspect the belts for cracks and wear.
Every 100 hours
• Lubricate the mower deck lift pivots.
• Change the engine oil (more often in dirty or dusty conditions).
• Check, clean and regap the spark plug.
• Check and clean engine cooling fins and shrouds.
Every 200 hours
• Change the engine oil filter.
Every 250 hours
• Replace the primary air filter.
• Check the secondary air filter.
Every 400 hours
• Change the hydraulic system filter and oil.
Every 500 hours
• Replace the secondary air filter.
• Replace the fuel filter (more often in dirty or dusty conditions).
• Adjust the caster pivot bearing.
• Check the electric clutch.
Monthly
• Check the battery.
Yearly
• Grease the front caster pivots (more often in dirty or dusty conditions).
• Lubricate the caster wheel hubs.
Yearly or before storage
• Paint chipped surfaces.
• Check all maintenance procedures listed above before storage.
Important:
Refer to your engine operator's manual for additional maintenance procedures.
CAUTION
If you leave the key in the ignition switch, someone could accidently start the engine and seriously injure
you or other bystanders.
Remove the key from the ignition before you do any maintenance.
27