Cleaning
Cleaning under the Mower
Deck
Service Interval:
Before each use or daily
1.
Park the machine on a level surface, move the
speed-control lever to the N
EUTRAL
position,
disengage the blade-control switch (PTO), and
engage the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Lift the mower deck and secure it in the raised
position. Refer to
the Service Position (page 16)
.
4.
Clean any grass buildup under the mower deck.
5.
Lower the mower deck to the operating position.
Refer to
Lowering the Mower Deck to the
Operating Position (page 16)
.
Cleaning Debris from the
Machine
Service Interval:
Before each use or daily
1.
Park the machine on a level surface, move the
speed-control lever to the N
EUTRAL
position,
disengage the blade-control switch (PTO), and
engage the parking brake.
2.
Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3.
Clean off any oil, debris, or grass buildup on
the machine, especially around the fuel tank,
engine, and exhaust area.
Disposing of Waste
Engine oil, batteries, hydraulic fluid, and engine
coolant are pollutants to the environment. Dispose of
these according to your state and local regulations.
62
Содержание Z Master 8000 Series
Страница 66: ...Schematics g020385 Wire Diagram Rev A 66...
Страница 67: ...g020536 Hydraulic Diagram Rev A 67...
