Toro Z Master 74901, Руководство по обслуживанию

Страница: 170 / 188

MOWER DECKS
6-33 Toro Z Master G3 3000/5000/6000 Series Service Manual
6
Using the Clutch Shim
Removing the Clutch Shim
3. Check the condition of the wire harness leads,
connectors, and terminals. Clean or repair as
necessary.
4. Verify that 12V is present at the clutch connector
when the PTO switch is engaged.
A. Armature E. Brake spacer
B. Field shell F. Re-gap shim
C. Rotor G. Brake pole
D. Brake mounting bolt
Some later model year units have been built with
clutches that contain a brake shim. When the clutch
brake has worn to the point where the clutch no longer
engages consistently, the shim can be removed to
extend the clutch life (Fig. 477).
1. Stop the engine, wait for all moving parts to stop,
and remove the key. Engage the parking brake.
Allow the machine to cool completely before starting
these instructions.
2. Using an air compressor, blow out any debris from
under the brake pole and around the brake spacers
(Fig. 478).
Fig. 477
fig. 70 G010869
Fig. 478 fig. 71 G010868
A
B
C
D
E
F G