Toro Z Master 74901, Руководство по обслуживанию

Страница: 105 / 188

HYDRAULIC SYSTEM
5-10 Toro Z Master G3 3000/5000/6000 Series Service Manual
5
6. Loosely install 3 bolts and nuts securing the cradle
to the UHT that was not serviced. The floor jack may
have to be repositioned to align holes (Fig. 298).
7. On the side of the machine being serviced, tighten
the 3 bolts securing the cradle to the UHT and the 2
bolts securing the UHT to the frame (Fig. 299).
Fig. 297 PICT-8638a
Fig. 298
PICT-8615a
Fig. 299 PICT-8640a
A. Cradle to UHT nuts
B. UHT mounted to frame bolts
8. Tighten the 3 bolts and nuts securing the cradle to
the UHT that was not serviced (Fig. 300).
Fig. 300 PICT-8615a
4. Raise the mower deck to the 3” (7.6cm) height-of-cut
position.
5. On the side of the machine that was serviced,
loosely install 2 mounting bolts, coming from the
top down, through the frame and into the UHT (Fig.
297).
A
B
B
A
A