Dealer Initial
Customer Initial
Check Procedure
Show the customer where the following features are located and how they function:
•
Fuel tank
•
Oil fill cap/Oil dipstick
•
Spark plug(s)
•
Engine-oil filter
•
Engine-oil drain
•
Fuel gauge, valve and hose
•
Air filter
•
Hydraulic-fluid reservoir
•
Hydraulic filter
•
Battery
•
Ignition switch
•
Throttle lever
•
Choke (if applicable)
•
Power take off (PTO)
•
Motion-control levers
•
Parking brake
•
Height-of-cut
•
Adjustable seat
•
Hydraulic-bypass valves
•
Mower deck baffle
Refer to the
Operator's Manual
to point out safety procedures, operation, and
maintenance procedures.
Review the warranty statement as shown in the
Operator's Manual.
Describe the post sale service procedures for your store.
Assist the customer in filling out and mailing the registration card or register online at
www.Toro.com
Make sure that the customer receives the
Operator's Manual
,
Engine Owner's Manual
,
Set Up Instructions
, and operator training material.
Make sure the customer knows the
Parts Catalog
is available at www.Toro.com.
Assist the customer in loading the machine.
Note:
When you, the dealer representative, have finished delivering the machine to the customer, sign and date in the space
provide below and keep a copy of this page for dealer records. Also, the dealer must remind the customer to use a full-width
trailer ramp to load the machine.
Signature:
Date:
Signature:
Date:
12
