Toro Z Master 74060, Руководство по обслуживанию

Страница: 85 / 178

5-32 Z Master 7500-D Series Service Manual
March 2018 - Digital Edition
Table of Contents
CHASSIS
Motion Control Assembly
Removal
NOTE: This procedure is performed on the left hand motion control assembly; follow the same procedure
for the right hand side.
1. Park the machine on a level surface, disengage the PTO, and engage the parking brake. Stop the engine, wait
for all moving parts to stop and remove the key.
2. Remove the two screws retaining the LH motion control cover assembly.
3. Remove the two bolts and nuts retaining the LH steering handle assembly to the LH lever-control motion.
4. Remove the lock nut from the damper motion control from the LH motion control assembly.
5. Remove the plug connector to the neutral switch.
6. Remove the wire harness from the wire anchor on the LH motion control assembly.
7. Remove screw, flat washer and nut retaining the front pump linkage to the LH motion control assembly (Figure
23).
Figure 23