Toro WorkmanR e2050, Руководство по обслуживанию

Страница: 7 / 120

Workman e2050/e2065 Page 1 – 3 Safety (Rev. B)
Maintenance and Service
1. Before servicing or making adjustments to the ve-
hicle, stop vehicle, turn on/off switch to OFF, engage
parking brake and remove key from the on/off switch.
2. Make sure machine is in safe operating condition by
keeping all nuts, bolts and screws tight.
3. Do not use open pans of flammable cleaning fluids
for cleaning parts.
4. Keep battery area free of excessive grease, grass,
leaves and dirt.
5. Disconnect batteries before servicing the machine.
Carefully remove one of the battery cables from the bat-
tery pack as the first step in any repair. Once a battery
cable has been removed, the electrical system on the
vehicle can be safely worked on. Take care during re-
pairs, however, to not allow tools or vehicle components
to complete the battery circuit that was opened with the
cable removal. Reattach the removed cable to the bat-
tery pack as the last step in any repair.
6. When using metal, uninsulated tools around batter-
ies, do not allow tools to contact both positive and nega-
tive battery terminals simultaneously.
7. Remove jewelry and watches before servicing elec-
trical components of the vehicle.
8. Battery acid is poisonous and can cause burns.
Avoid contact with skin, eyes and clothing. Protect your
face, eyes and clothing when working with batteries.
9. Battery gases can explode. Keep cigarettes, sparks
and flames away from the batteries. Always service,
store and charge the vehicle batteries in a well ventilated
area.
10.Never use an open flame to check level or leakage
of battery electrolyte.
11. When connecting the battery charger to the vehicle,
connect the charger cord to the vehicle charger recep-
tacle before plugging the charger power cord into an
outlet. After charging the vehicle batteries, unplug the
charger power cord from the outlet before disconnecting
the charger cord from the vehicle charger receptacle.
12.If major repairs are ever needed or assistance is de-
sired, contact an Authorized Toro Distributor.
13.To assure optimum performance and continued
safety of the machine, use genuine Toro replacement
parts and accessories. Replacement parts and acces-
sories made by other manufacturers may result in non-
conformance with safety standards and the warranty
may be voided.
14.When raising the machine to change tires or to per-
form other service, use correct blocks, hoists and jacks.
Make sure machine is parked on a solid level surface
such as a concrete floor. Prior to raising the machine, re-
move any attachments that may interfere with the safe
and proper raising of the machine. Always chock or
block wheels. Use jack stands or solid wood blocks to
support the raised machine. If the machine is not proper-
ly supported by blocks or jack stands, the machine may
move or fall, which may result in personal injury (see
Jacking Instructions in the Operator’s Manual and in this
Chapter).
Safety