Toro Workman MD, Руководство по обслуживанию

Страница: 11 / 210

Workman MD/MDX Page 2 -- 1 Product Records and Maintenance
Chapter 2
Product Records and Maintenance
Table of Contents
PRODUCT RECORDS 1 . . . . . . . . . . . . . . . . . . . . . . . . .
MAINTENANCE 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
EQUIVALENTS AND CONVERSIONS 2 . . . . . . . . . . .
Decimal and Millimeter Equivalents 2 . . . . . . . . . . . .
U.S. to Metric Conversions 2 . . . . . . . . . . . . . . . . . . .
TORQUE SPECIFICATIONS 3 . . . . . . . . . . . . . . . . . . . .
Fastener Identification 3 . . . . . . . . . . . . . . . . . . . . . . .
Standard Torque for Dry, Zinc Plated and
Steel Fasteners (Inch Series). 4 . . . . . . . . . . . . . . .
Standard Torque for Dry, Zinc Plated and
Steel Fasteners (Metric Fasteners). 5 . . . . . . . . . .
Other Torque Specifications 6 . . . . . . . . . . . . . . . . . .
Conversion Factors 6 . . . . . . . . . . . . . . . . . . . . . . . . . .
Product Records
Insert Operator’s Manual and Parts Catalog for your
Workman at the end of this chapter. Additionally, if any
optional equipment or accessories have been installed
to your machine, insert the Installation Instructions, Op-
erator’s Manuals and Parts Catalogs for those options
at the end of this chapter.
Maintenance
Maintenance procedures and recommended service in-
tervals for your Workman are covered in the Operator’s
Manual. Refer to that publication when performing regu-
lar equipment maintenance.
Product
Records
and
M
aintenance