Toro Workman 07235, Руководство оператора

Страница: 47 / 60

Checking the
Transaxle-Fluid Level
Service Interval: Every 100 hours
Fluid Type: SAE 10W30 (API service SJ or higher)
1. Park the machine on a level surface, engage the
parking brake, shut off the engine, and remove
the key.
2. Remove the bolt from the level-indicating hole
(
Figure 58 ).
Note:
The transaxle fluid level should be at the
bottom of the level indicator hole.
g002082
Figure 58
1. Level-indicator hole
3. If the transaxle fluid is not level with the bottom
of the level indicating hole, fill the reservoir
with the specified fluid; refer to
Changing the
Transaxle Fluid (page 47) .
Changing the Transaxle
Fluid
Service Interval: Every 800 hours/Yearly (whichever
comes first)
Fluid Type: SAE 10W30 (API service SJ or higher)
Fluid Capacity: 1.4 L (1.5 US qt)
1. Park the machine on a level surface, engage the
parking brake, shut off the engine, and remove
the key.
2. Wipe the area around the fill and drain plugs
clean with a rag (
Figure 59 ).
g002109
Figure 59
1. Drain plug 2. Fill plug
3. Align a drain pan with a capacity of 2 L (2.1 qt)
or more under the drain plug.
4. Remove the fill plug by rotating it
counterclockwise (
Figure 59 ).
Note:
Retain the fill plug and gasket for
installation in step 8 .
5. Remove the drain plug by rotating it
counterclockwise (
Figure 59 ).
Note:
Retain the drain plug and gasket for
installation in step 6 .
Note:
Allow the fluid to drain from the transaxle
completely.
6. Install and tighten the drain plug and gasket into
the drain-plug hole of the transmission (
Figure
59 ).
Note:
Dispose of the used fluid at a certified
recycling center.
7. Fill the reservoir ( Figure 60 ) through the fill-plug
hole with approximately 1.4 L (1.5 US qt) of
the specified fluid or until the fluid level in the
transmission is even with the bottom of the
threads. (
Figure 59 ).
g004048
Figure 60
1. Fluid fill
8. Install and tighten the fill plug and gasket into
the fill-plug hole of the transmission (
Figure 59 ).
9. Start the engine and operate the machine.
47