Assembly
9
13. Raise tractor attachment lift to the transport
position and place a block under snowthrower
housing. Turn the Dial-A-Height knob
counterclockwise, all the way, and lower the
attachment to the mounting position; refer to
Operation, Lowering Attachments.
14. Raise arm of lift link into the relaxed position
(Fig. 13).
15. Install lift spring between frame and lift link
with retainers, inside body of spring, and secure
with hairpin cotters (Fig. 13).
16. Push arm of lift link down into locked position
(Fig. 13).
m–2816
1
2
3
4
4
Figure 13
1.
Lift link arm
2.
Lift spring
3.
Retainer
4.
Hairpin cotter
17. Remove the two wing nuts and belt cover from
the tractor (Fig. 14).
m–2534
1
2
2
Figure 14
5.
Belt cover
6.
Wing nut
18. Remove hairpin cotters from trunnion and
bottom of yoke (Fig. 15).
19. Unlatch and remove locking clevis pin that
secures yoke assembly to clutch shaft. Pivot
yoke out and forward to remove from clutch
shaft and engagement plate (Fig. 15).
20. Place snowthrower belt in outer pulley groove
(Fig. 15).
21. Assemble yoke and engagement plate and attach
locking clevis pin, trunnion and hairpin cotters
to secure (Fig. 15).
m–2691
1
2
3
4
1
7
6
5
Figure 15
1.
Hairpin cotter
2.
Trunnion
3.
Engagement plate
4.
Locking clevis pin
5.
Yoke
6.
Clutch shaft
7.
Outer groove
