6
Setup
Note: Use this chart as a checklist to ensure that all parts have been received. Without these parts, total setup cannot be
completed.
Description
Qty.
Use
Castor Beam
Capscrew
Washer
Nut
2
6
12
6
Mount caster beam assemblies to deck
Castor Wheel Assembly
4
Mount to caster beams
Tow Arm
Clevis pin
Cotter pin
2
2
2
Secure tow arms to mounting brackets on deck
Washer
Hair pin cotter
2
2
Secure tow arms to frame pins
Clevis pin
Hair pin cotter
2
2
Secure lift chains to mounting brackets on deck
Operator’s Manual
1
Read before operating the machine.
Parts Catalog
1
Registration card
1
Fill out and return to Toro.
Install Castor Beams
1. Secure a castor beam to height adjustment plates with
(3) capscrews (6) washers and (3) nuts (Fig. 1). Washers
to be positioned outside height adjustment plates.
Important
Assure castor beams are installed with the
longer castor plate mount to the front (Fig. 1).
2. Repeat procedure on opposite end of deck. Make sure
both beams are mounted at the same height.
1
3
4
2
Figure 1
1.
Castor beam
2.
Height adjustment plates
3.
Longer castor plate
4.
Shorter castor plate
