Toro TimeCutter ZD420T, Руководство оператора

Страница: 16 / 48

Figure 13
1. Center unlock position 3. Backward
2. Forward 4. Brake position
To go straight, apply equal pressure to both motion
control levers (Figure 13).
To turn, release pressure on the motion control lever
toward the direction you want to turn (Figure 13).
The farther you move the traction control levers in
either direction, the faster the machine will move in
that direction.
To stop, pull the motion control levers to neutral.
Backward
1. Move the levers to the center, unlocked position.
2. To go backward, slowly pull the motion control
levers rearward (Figure 13).
To go straight, apply equal pressure to both motion
control levers (Figure 13).
To turn, release the pressure on the motion
control lever toward the direction you want to turn
(Figure 13).
To stop, push the motion control levers to neutral.
Operating the Blades
The blade control switch, represented by a power
take-off (PTO) symbol, engages and disengages power
to the mower blades. This switch controls power to any
attachments that draw power from the engine, including
the mower deck and cutting blades.
Engaging the Blades
1. Release pressure on the traction control levers and
place the machine in neutral.
2. Move the throttle to the Fast position.
3. Pull out on the blade control switch to engage
blades (Figure 14).
Figure 14
1. Blade control switch-On 2. Blade control switch-Off
Disengaging the Blades
Push the blade control switch to Off to disengage the
blades (Figure 14).
Stopping the Machine
To stop the machine, move the traction control levers
to neutral and separate to the brake position, disengage
the blade control switch, ensure the throttle is in the fast
position, and turn the ignition key to off. Remember to
remove the key from the ignition switch.
WARNING
Children or bystanders may be injured if they
move or attempt to operate the mower while it is
unattended.
Always remove the ignition key and move the
motion control levers to the brake position when
leaving the machine unattended, even if just for
a few minutes.
The Safety Interlock System
WARNING
If safety interlock switches are disconnected or
damaged the machine could operate unexpectedly
causing personal injury.
• Do not tamper with the interlock switches.
• Check the operation of the interlock switches
daily and replace any damaged switches before
operating the machine.
16