manualshive.com logo in svg

Toro TimeCutter ZD420T, Руководство оператора

Поделиться
Скачать
Toro TimeCutter ZD420T Скачать руководство пользователя страница 14

Important:

Never use methanol, fuel containing

methanol, or gasohol containing more than 10%
ethanol because the fuel system could be damaged.
Do not mix oil with fuel.

DANGER

In certain conditions, fuel is extremely flammable
and highly explosive. A fire or explosion from fuel
can burn you and others and can damage property.

•

Fill the fuel tank outdoors, in an open area,
when the engine is cold. Wipe up any fuel that
spills.

•

Never fill the fuel tank inside an enclosed trailer.

•

Do not fill the fuel tank completely full. Add
fuel to the fuel tank until the level is 1/4 to 1/2
inch (6 to 13 mm) below the bottom of the filler
neck. This empty space in the tank allows fuel
to expand.

•

Never smoke when handling fuel, and stay
away from an open flame or where fuel fumes
may be ignited by a spark.

•

Store fuel in an approved container and keep it
out of the reach of children. Never buy more
than a 30-day supply of fuel.

•

Do not operate without entire exhaust system
in place and in proper working condition.

DANGER

In certain conditions during fueling, static
electricity can be released causing a spark which
can ignite the fuel vapors. A fire or explosion from
fuel can burn you and others and can damage
property.

•

Always place fuel containers on the ground
away from your vehicle before filling.

•

Do not fill fuel containers inside a vehicle or on
a truck or trailer bed because interior carpets
or plastic truck bed liners may insulate the
container and slow the loss of any static charge.

•

When practical, remove gas-powered
equipment from the truck or trailer and refuel
the equipment with its wheels on the ground.

•

If this is not possible, then refuel such
equipment on a truck or trailer from a portable
container, rather than from a fuel dispenser
nozzle.

•

If a fuel dispenser nozzle must be used, keep
the nozzle in contact with the rim of the fuel
tank or container opening at all times until
fueling is complete.

WARNING

Fuel is harmful or fatal if swallowed. Long-term
exposure to vapors can cause serious injury and
illness.

•

Avoid prolonged breathing of vapors.

•

Keep face away from nozzle and gas tank or
conditioner opening.

•

Keep gas away from eyes and skin.

Using Stabilizer/Conditioner

Use a fuel stabilizer/conditioner in the machine to
provide the following benefits:

•

Keeps fuel fresh during storage of 30 days or less.
For longer storage it is recommended that the fuel
tank be drained.

•

Cleans the engine while it runs

•

Eliminates gum-like varnish buildup in the fuel
system, which causes hard starting

Important:

Do not use fuel additives containing

methanol or ethanol.

Add the correct amount of gas stabilizer/conditioner
to the gas.

Note:

A fuel stabilizer/conditioner is most effective

when mixed with fresh fuel. To minimize the chance of
varnish deposits in the fuel system, use fuel stabilizer
at all times.

Filling the Fuel Tank

1. Shut the engine off and set the parking brake.

2. Clean around the fuel tank cap and remove the cap.

Add unleaded regular fuel to the fuel tank until the
level is 1/4 to 1/2 inch (6 to 13 mm) below the
bottom of the filler neck. This space in the tank
allows fuel to expand. Do not fill the fuel tank
completely full.

3. Install the fuel tank cap securely. Wipe up any fuel

that may have spilled.

Checking the Engine Oil Level

Before you start the engine and use the machine, check
the oil level in the engine crankcase; refer to Checking
the Oil Level in Engine Maintenance (page 27).

14

Содержание TimeCutter ZD420T

















































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды