Toro TimeCutter Z480, Руководство оператора

Страница: 26 / 44

Figure 30
1. Hose clamp 3. Filter
2. Fuel line
5. Pull the fuel line off of the fuel filter (Figure 30).
6. Open the fuel shut-off valve. Allow gasoline to
drain into a gas can or drain pan.
Note:
Now is the best time to install a new
fuel filter because the fuel tank is empty.
7. Install the fuel line onto the fuel filter. Slide
the hose clamp close to the fuel filter to secure
the fuel line (Figure 30).
Replacing the Fuel Filter
Replace the fuel filter after every 100 operating
hours or yearly, whichever occurs first.
Never install a dirty filter if it is removed from the
fuel line.
1. Park the machine on a level surface and
disengage the blade control switch.
2. Move the motion control levers to the brake
position, stop the engine, remove the key, and
wait for all moving parts to stop before leaving
the operating position.
3. Close the fuel shut-off valve located under the
front of the fuel tank.
4. Squeeze the ends of the hose clamps together
and slide them away from the filter (Figure 31).
Figure 31
1. Hose clamp 3. Filter
2. Fuel line
5. Remove the filter from the fuel lines.
6. Install a new filter and move the hose clamps
close to the filter (Figure 31).
7. Open the fuel shut-off valve.
Electrical System
Maintenance
Warning
CALIFORNIA
Proposition 65 Warning
Battery posts, terminals, and related
accessories contain lead and lead
compounds, chemicals known to the State of
California to cause cancer and reproductive
harm. Wash hands after handling.
26