Toro TimeCutter SW 5000, Руководство оператора

Страница: 46 / 56

g014930
Figure 58
Mower Decks with 2 Blades
1. Idler pulley 4. Spring
2. Mower belt 5. Engine pulley
3. Outside pulley 6. Spring-removal tool
g014931
Figure 59
Mower Decks with 3 Blades
1. Idler pulley 4. Spring
2. Mower belt 5. Engine pulley
3. Outside pulley 6. Spring-removal tool
5. Route the new belt around the engine pulley and
mower pulleys (
Figure 59 ).
6. Using a spring-removal tool, (Toro part no.
92-5771), install the idler spring over the deck
hook, and place tension on the idler pulley and
mower belt ((
Figure 58 and Figure 59 ).
Installing the Mower
1. Park the machine on a level surface and
disengage the blade-control switch.
2. Ensure that the parking brake is engaged,
shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Slide the mower under the machine.
4. Lower the height-of-cut lever to the lowest
position.
5. Lift the rear of the mower deck and guide the
hanger brackets over the rear lift rod (
Figure 57 ).
6. Attach the front support rod to the mower deck
with the clevis pin and hairpin cotter (
Figure 56 ).
7. Install the mower belt onto the engine pulley;
refer to Replacing the Mower Belt.
46