Toro TimeCutter SW 5000, Руководство оператора

Страница: 23 / 56

Positioning the Seat
g027249
Figure 15
Positioning the Steering
Wheel
The steering wheel has 3 positions for operation and
1 full-up position. Use the full-up position for stepping
on and off the machine and getting out of the seat.
When operating the machine, position the steering
wheel where you have the best control of the machine
and are most comfortable.
1. Press your foot onto the steering-column release
lever.
2. Position the steering wheel to the desired
position (
Figure 16 ).
g027751
Figure 16
Adjusting the Anti-scalp
Rollers (for 107 cm (42-inch)
Mower Decks)
Whenever you change the height of cut, it is
recommended to adjust the height of the anti-scalp
rollers.
Note:
Adjust the anti-scalp rollers so the rollers do
not touch the ground in normal, flat mowing areas.
1. Disengage the blade-control switch (PTO) and
ensure that the parking brake is engaged.
2. Shut off the engine, remove the key, and wait
for all moving parts to stop before leaving the
operating position.
3. Adjust the anti-scalp rollers to 1 of the following
positions:
•
Upper hole—use this position with the mower
deck in the 63 mm (2-1/2 inches) and below
the height-of-cut positions (
Figure 17 ).
•
Lower hole—use this position with the mower
deck in the 76 mm (3 inches) and above the
height-of-cut positions (
Figure 17 ).
23