Toro TimeCutter SS 4225, Руководство оператора

Страница: 19 / 52

Driving Forward
Note:
Always use caution when backing up and turning.
1. Move the levers to the center, unlocked position.
2. To go forward, slowly push the motion-control levers
forward (
Figure 14 ).
G008952
Figure 14
To go straight, apply equal pressure to both
motion-control levers (
Figure 14 ).
To turn, release pressure on the motion-control lever
toward the direction you want to turn (
Figure 14 ).
The farther you move the motion-control levers in
either direction, the faster the machine moves in that
direction.
To stop, pull the motion-control levers to neutral.
Driving Backward
Note:
Always use caution when backing up and turning.
1. Move the levers to the center, unlocked position.
2. To go backward, look behind you and down, as you
slowly pull the motion-control levers rearward (
Figure
15 ).
G008953
Figure 15
To go straight, apply equal pressure to both
motion-control levers (
Figure 15 ).
To turn, release the pressure on the motion-control
lever toward the direction you want to turn.
To stop, push the motion-control levers to neutral.
Using the Smart Speed TM Control
System
The Smart Speed TM Control-System lever, located below the
operating position ( Figure 16 ), gives the operator a choice
to drive the machine at 3 ground speed ranges—trim, tow,
and mow.
Figure 16
1. Smart-speed lever
19