Toro TimeCutter SS 4225, Руководство оператора

Страница: 13 / 52

Product Overview
Figure 4
1. Deflector 4. Height-of-cut lever 7. Footrest 10. Control panel
2. Rear drive wheel 5. Operator seat 8. Engine 11. Engine guard
3. Motion-control levers 6. Smart Speed
™
lever 9. Fuel-tank cap 12. Front caster wheel
Controls
Become familiar with all of the controls in Figure 4 and
Figure 5 before you start the engine and operate the machine.
Figure 5
Control Panel
1. Throttle 3. Blade-control switch
(power takeoff)
2. Ignition switch
Ignition Switch
The ignition switch has 3 positions: O
FF
, R
UN
, and S
TART
.
The key turns to S
TART
and moves back to R
UN
upon
release. Turning the key to the O
FF
position stops the engine;
however, always remove the key when leaving the machine
to prevent someone from accidentally starting the engine
(
Figure 5 ).
Throttle Control
The throttle controls the engine speed, and it has a
continuous-variable setting from Slow to Fast (
Figure 5 ).
Blade-Control Switch (Power Takeoff)
The blade-control switch, represented by a power-takeoff
(PTO) symbol, engages and disengages power to the mower
blades (
Figure 5 ).
Motion-Control Levers and Park
Position
The motion-control levers are speed-sensitive controls of
independent wheel motors. Moving a lever forward or
backward turns the wheel on the same side forward or in
reverse; the wheel speed is proportional to the amount you
move the lever. Move the motion-control levers outward
from the center to the P
ARK
position when exiting the
machine ( Figure 13 ). Always position the motion-control
levers into the P
ARK
position when you stop the machine
or leave it unattended.
13