Toro TimeCutter SS 4225, Руководство оператора

Страница: 18 / 52

Operating the Blades
The blade-control switch, engages and disengages power
to the mower blades. This switch controls power to any
attachments that draw power from the engine, including the
mower deck and cutting blades.
Engaging the Blades
Important:
Do not engage the blades when parked in
tall grass. Belt or clutch damage can occur.
Note:
Always engage the blades with the throttle in the
F
AST
position.
g027533
B
C
A
Figure 11
Disengaging the Blades
g027247
Figure 12
1. Control panel 2. Blade-control switch—Off
Stopping the Engine
1. Disengage the blades by moving the blade-control
switch to Off (
Figure 12 ).
2. Move the throttle lever to between the half and full
throttle position.
3. Turn the ignition key to Off and remove the key.
Driving the Machine
Driving the machine benefits from an understanding of
what zero-turn-radius mower means. The drive wheels turn
independently, powered by hydraulic motors on each axle;
hence 1 side can turn in reverse while the other turns forward,
causing the machine to spin rather than turn. This vastly
improves the machine maneuverability but may require some
adjustment if you are unfamiliar.
WARNING
The machine can spin very rapidly. You may lose
control of the machine and cause personal injury or
damage to the machine.
• Use caution when making turns.
• Slow the machine down before making sharp
turns.
The throttle control regulates the engine speed as measured
in rpm (revolutions per minute). Placing the throttle control
in the F
AST
position can be best for performance. For most
applications, operate the machine in the full-throttle position.
Figure 13
1. P
ARK
position 4. Backward
2. Center, unlock position 5. Front of the Machine
3. Forward
18