Toro TimeCutter HD X4850 Скачать руководство пользователя страница 4 | Manualshive

Страница: 4 / 56

background image

Belt Maintenance ................................................ 41

Inspecting the Belts .......................................... 41
Replacing the Mower Belt ................................. 41

Mower Maintenance............................................. 42

Servicing the Cutting Blades ............................. 42
Leveling the Mower Deck.................................. 45
Removing the Mower Deck ............................... 46
Installing the Mower Deck................................. 47
Replacing the Grass Deflector .......................... 48

Cleaning .............................................................. 49

Washing the Underside of the Mower................ 49
Disposing of Waste........................................... 49

Storage ................................................................... 50

Storage Safety.................................................. 50
Cleaning and Storage ....................................... 50
Storing the Battery ............................................ 51

Troubleshooting ...................................................... 52
Schematics ............................................................. 54

Safety

This machine has been designed in accordance with
EN ISO 5395:2013.

General Safety

This product is capable of amputating hands and
feet and of throwing objects. Always follow all safety
instructions to avoid serious personal injury.

Using this product for purposes other than its intended
use could prove dangerous to you and bystanders.

•

Do not operate the machine near drop-offs,
ditches, embankments, water, or other hazards, or
on slopes greater than 15 degrees.

•

Read and understand the contents of this

Operator’s Manual

before starting the engine.

•

Do not put your hands or feet near moving
components of the machine.

•

Do not operate the machine without all guards
and other safety protective devices in place and
working on the machine.

•

Keep children and bystanders out of the operating
area. Never allow children to operate the machine.

•

Stop the machine and shut off the engine before
servicing, fueling, or unclogging the machine.

Improperly using or maintaining this machine can
result in injury. To reduce the potential for injury,
comply with these safety instructions and always pay
attention to the safety-alert symbol, which means
Caution, Warning, or Danger—personal safety
instruction. Failure to comply with these instructions
may result in personal injury or death.

You can find additional safety information where
needed throughout this manual.

4

«
...
2
3
4
5
6
...
»

Содержание TimeCutter HD X4850

























































Отзывы:

Нет отзывов

Похожие инструкции для TimeCutter HD X4850

Бренд: Ybravo Страницы: 2

Бренд: Snapper Страницы: 44

Бренд: Poulan Pro Страницы: 30

Бренд: Flymo Страницы: 174

Бренд: Brute Страницы: 44

Бренд: Lastec Страницы: 21

Бренд: Grizzly Страницы: 96

Бренд: P.I.T. Страницы: 23

Бренд: QGarden Страницы: 36

Бренд: Qualcast Страницы: 20

Бренд: Powersmart Страницы: 20

Бренд: Grizzly Страницы: 160

BRM 46-141 A-OHV

Бренд: Grizzly Страницы: 172

Бренд: Craftsman Страницы: 56

Бренд: Craftsman Страницы: 56

Бренд: Craftsman Страницы: 56

Бренд: Craftsman Страницы: 56

Бренд: Craftsman Страницы: 56

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды