Toro TimeCutter HD X4850, Руководство оператора

Страница: 2 / 56

This product complies with all relevant European
directives; for details, please see the separate product
specific Declaration of Conformity (DOC) sheet.
Gross or Net Torque
The gross or net torque of this engine was laboratory
rated by the engine manufacturer in accordance with
the Society of Automotive Engineers (SAE) J1940 or
J2723. As configured to meet safety, emission, and
operating requirements, the actual engine torque on
this class of mower will be significantly lower.
WARNING
Removing standard original equipment parts
and accessories may alter the warranty,
traction, and safety of the machine. Failure to
use original Toro parts could cause serious
injury or death. Making unauthorized changes
to the engine, fuel, or venting system, may
violate regulations.
Replace all parts including, but not limited
to, tires, belts, blades, and fuel system
components with original Toro parts.
Go to www.Toro.com to view specifications on your
mower model.
Important:
If you are using a machine with a Toro
engine above 1500 m (5,000 ft) for a continuous
period, ensure that the High Altitude Kit has been
installed so that the engine meets CARB/EPA
emission regulations. The High Altitude Kit
increases engine performance while preventing
spark-plug fouling, hard starting, and increased
emissions. Once you have installed the kit, attach
the high-altitude label next to the serial decal on
the machine. Contact any Authorized Toro Service
Dealer to obtain the proper High Altitude Kit and
high-altitude label for your machine. To locate
a dealer convenient to you, access our website
at www.Toro.com or contact our Toro Customer
Care Department at the number(s) listed in your
Emission Control Warranty Statement.
Remove the kit from the engine and restore the
engine to its original factory configuration when
running the engine under 1500 m (5,000 ft). Do
not operate an engine that has been converted
for high-altitude use at lower altitudes; otherwise,
you could overheat and damage the engine.
If you are unsure whether or not your machine
has been converted for high-altitude use, look for
the following label.
decal127-9363
Introduction
This rotary-blade, riding lawn mower is intended to be
used by homeowners in residential applications. It is
designed primarily for cutting grass on well-maintained
lawns. It is not designed for cutting brush, mowing
grass and other growth alongside highways, or for
agricultural uses.
Read this information carefully to learn how to operate
and maintain your product properly and to avoid
injury and product damage. You are responsible for
operating the product properly and safely.
You may contact Toro directly at www.Toro.com
for product safety and operation training materials,
accessory information, help finding a dealer, or to
register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready.
Figure 1
identifies the location of the model and serial numbers
on the product. Write the numbers in the space
provided.
Important:
With your mobile device, you can
scan the QR code on the serial number decal (if
equipped) to access warranty, parts, and other
product information.
© 2017—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
2
Contact us at www.Toro.com.
Printed in the USA
All Rights Reserved