Toro Super Recycler 21566, Руководство оператора

Страница: 25 / 104

Bagging the Clippings
Use the grass bag when you want to collect grass and leaf clippings from the lawn.
Note:
By default this machine is equipped with an economy blade for improved runtime; it also includes an
optional performance blade for improved bagging and performance. Before bagging, install the performance
blade; refer to
Replacing the Blade (page 28) .
Installing the Grass Bag
1. Shut off the machine and wait for all moving parts to stop; refer to Shutting Off the Machine (page 22) .
2. Remove the battery pack from the machine; refer to Removing the Battery Pack from the Machine
(page 24) .
3. Raise and hold up the rear deflector (A of Figure 20 ).
4. Remove the rear-discharge plug by pushing in the latch with your thumb and pulling the plug out from
the machine (B and C of
Figure 20 ).
5. Install the bag-rod ends into the notches at the base of the handle, and rock the bag back and forth to
ensure that the bag-rod ends are seated at the bottom of both notches (D of
Figure 20 ).
6. Lower the rear deflector until it rests on the grass bag.
g367752
Figure 20
23