Toro Sitework Systems 22420, Руководство оператора

Страница: 2 / 12

There may be buried power, gas, and/or
telephone lines in the work area. Shock or
explosion may occur if you dig into them.
Have the property or work area marked for
buried lines and do not dig in marked areas.
Contact your local marking service or utility
company to have the property marked (for
example, in the United States, call 811 for the
nationwide marking service).
Introduction
Read this information carefully to learn how to operate
and maintain your product properly and to avoid injury
and product damage. You are responsible for operating
the product properly and safely.
You may contact Toro directly at www.Toro.com for
product and accessory information, help finding a
dealer, or to register your product.
Whenever you need service, genuine Toro parts, or
additional information, contact an Authorized Service
Dealer or Toro Customer Service and have the model
and serial numbers of your product ready. The model
and serial numbers are printed on a plate located on the
right side of the drive head. Write the numbers in the
space provided.
Model No.
Serial No.
This manual identifies potential hazards and has
safety messages identified by the safety alert symbol
(Figure 1), which signals a hazard that may cause serious
injury or death if you do not follow the recommended
precautions.
Figure 1
1. Safety alert symbol
This manual also uses 2 words to highlight information.
Important calls attention to special mechanical
information and Note emphasizes general information
worthy of special attention.
Contents
Introduction................................................................. 2
Safety ........................................................................... 3
Stability Ratings.................................................... 4
Safety and Instructional Decals ............................. 4
Product Overview ........................................................ 5
Specifications ....................................................... 5
Attachments/Accessories..................................... 5
Operation..................................................................... 5
Installing Accessories ........................................... 5
Removing an Accessory........................................ 5
Boring a Hole ....................................................... 6
Storage ......................................................................... 8
Troubleshooting........................................................... 9
© 2008—The Toro® Company
8111 Lyndale Avenue South
Bloomington, MN 55420
2
Contact us at www.Toro.com.
Printed in the USA.
All Rights Reserved