Toro Reelmaster 5610-D, Руководство пользователя

Страница: 69 / 84

5. Install the coolant-reservoir cap.
6. Close and latch the hood; refer to Closing the Hood
(page 52) .
Removing Debris from the Cooling
System
Service Interval: Before each use or daily (More frequently
in dirty operating conditions).
Every 100 hours—Inspect the cooling system hoses.
Every 2 years—Flush and replace the cooling
system fluid.
1. Prepare the machine for maintenance; refer to
Preparing for Maintenance (page 52) .
2. Open the hood; refer to Opening the Hood (page 52) .
3. Thoroughly clean all debris out of the engine area.
4. Close and latch the hood; refer to Closing the Hood
(page 52) .
5. Unlatch the rear screen and pivot it open ( Figure 140 ).
g004138
Figure 140
1. Latch 2. Rear screen
6. Thoroughly clean the screen with compressed air.
7. Rotate the 2 oil-cooler latches inward, and tilt oil
cooler (
Figure 141 ).
g003974
Figure 141
1. Oil cooler 2. Oil-cooler latches
8. Thoroughly clean both sides of the oil cooler and the
radiator (
Figure 142 ) with compressed air.
g021880
Figure 142
1. Radiator
9. Raise the oil cooler and secure it with the 2 latches.
10. Close and latch the screen.
69