Toro Reelmaster 5210 Скачать руководство пользователя страница 30 | Manualshive

Страница: 30 / 60

background image

4. Fill the tank until the level is to the bottom of the

filler neck with diesel fuel.

5.

Install fuel tank cap tightly after filling tank.

Note:

If possible, fill the fuel tank after each use.

This will minimize possible buildup of condensation
inside the fuel tank.

Checking the Hydraulic Fluid

The machines reservoir is filled at the factory with
approximately 8 U.S. gallons (30 l) of high quality
hydraulic fluid. Check the level of the hydraulic fluid
before the engine is first started and daily thereafter.
The recommended replacement fluid is as follows:

Toro Premium All Season Hydraulic Fluid

(Available in 5

gallon pails or 55 gallon drums. See parts catalog or Toro
distributor for part numbers.)

Alternate fluids: If the Toro fluid is not available, other
fluids may be used provided they meet all the following
material properties and industry specifications. We do
not recommend the use of synthetic fluid. Consult
with your lubricant distributor to identify a satisfactory
product Note: Toro will not assume responsibility for
damage caused by improper substitutions, so use only
products from reputable manufacturers who will stand
behind their recommendation.

High Viscosity Index/Low Pour Point Anti-wear Hydraulic
Fluid, ISO VG 46

Material Properties:

Viscosity, ASTM D445

cSt @ 40°C 44 to 48
cSt @ 100°C 7.9 to 8.5

Viscosity Index ASTM
D2270

140 to 160

Pour Point, ASTM D97

-34°F to -49°F

Industry Specifications:

Vickers I-286-S (Quality Level), Vickers M-2950-S
(Quality Level), Denison HF-0

Note:

Many hydraulic fluids are almost colorless,

making it difficult to spot leaks. A red dye additive
for the hydraulic system oil is available in 2/3 oz. (20
ml) bottles. One bottle is sufficient for 4-6 gal (15-22
1) of hydraulic oil. Order part no. 44-2500 from your
authorized Toro distributor.

Biodegradable Hydraulic Fluid - Mobil 224H

Toro Biodegradable Hydraulic Fluid

(Available in 5

gallon pails or 55 gallon drums. See parts catalog or Toro
distributor for part numbers.)

Alternate fluid:

Mobil EAL 224H

Note:

This is vegetable-oil based biodegradable

oil tested and approved by Toro for this model.
This fluid is not as resistant to high temperatures as
standard fluid, so be sure to follow the recommended
fluid change intervals with this fluid. Contamination

by mineral-based hydraulic fluids will change the
biodegradability and toxicity of this oil. When changing
from standard fluid to the biodegradable type, be
certain to follow the approved flushing procedure.
Contact your local Toro Distributor for details.

1. Position machine on a level surface, lower the

cutting units and stop the engine.

2. On the right side of the machine, raise the hydraulic

tank cover (Figure 35).

Figure 35

1.

Hydraulic tank cover

3. Clean area around filler neck and cap of hydraulic

tank (Figure 36). Remove cap from filler neck.

30

«
...
28
29
30
31
32
...
»

Содержание Reelmaster 5210





























































Отзывы:

Нет отзывов

Похожие инструкции для Reelmaster 5210

Бренд: Jacobsen Страницы: 114

Бренд: Yard-Man Страницы: 36

Бренд: Snapper Страницы: 1

ELM 42/1800 PLUS

Бренд: F.F. Group Страницы: 52

Бренд: Stihl Страницы: 514

Бренд: Toro Страницы: 80

Бренд: MTD Страницы: 40

Бренд: Gardena Страницы: 13

Podadora 1302720

Бренд: Surtek Страницы: 8

Бренд: Kraftixx Страницы: 246

Бренд: Ego Power+ Страницы: 16

Бренд: Ego Power+ Страницы: 224

Бренд: Craftsman Страницы: 32

Бренд: Craftsman Страницы: 44

Бренд: Craftsman Страницы: 44

Бренд: Craftsman Страницы: 48

Бренд: Craftsman Страницы: 52

Бренд: Craftsman Страницы: 52

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды