Toro Recycler 20331, Руководство оператора

Страница: 7 / 40

Adjust the cutting height as desired. Set the front wheels to
the same height as the rear wheels (Figure 9).
Note:
To raise the mower, move all the cutting height levers
rearward. To lower the mower, move all the cutting height
levers forward.
Figure 9
1. Raise the mower 2. Lower the mower
Note:
The cutting height settings are 1 inch (25 mm); 1-3/8
inches (35 mm); 1-3/4 inches (44 mm); 2-1/8 inches (54 mm);
2-1/2 inches (64 mm); 2-7/8 inches (73 mm); 3-1/4 inches
(83 mm); 3-5/8 inches (92 mm); and 4 inches (102 mm).
Starting the Engine
1. Hold the blade control bar against the handle
(Figure 10).
Figure 10
1. Blade control bar 2. Recoil start handle
2. Pull the recoil start handle lightly until you feel
resistance, then pull it sharply. Allow the rope to return
to the handle slowly (Figure 10).
Note:
If the mower does not start after several
attempts, contact an Authorized Service Dealer.
Using the Self-propel Drive
To operate the self-propel drive, squeeze the self-propel drive
bar (Figure 11) toward the handle and hold it.
7