Toro ProLine 30188, Руководство оператора

Страница: 21 / 44

Operation
19
Backward
1. To go backward, slowly pull the control bar
rearward (Fig. 10).
2. To go straight, apply equal pressure to both ends
of the upper control bar (Fig. 10).
3. To turn, release pressure on the upper control bar
side away from the direction you want to turn
(Fig. 10).
4. To stop, release the upper control bar to stop
both wheels (Fig. 10).
Neutral
Release the upper control bar to stop. The machine
will automatically return to neutral. When in neutral,
the hydrostatic drive system will provide dynamic
braking so the machine will not roll.
Note: Very slow drive motion with engine
running and the control in neutral is
normal. Excessive drive motion when
the control is in neutral may indicate
adjustment is needed. Refer to:
Adjusting Neutral procedure.
Stopping the Machine
1. To stop, release the upper control bar to stop
both wheels (Fig. 10).
2. Release the blade control bail (PTO), to stop the
mower blades. Move the throttle control to
“SLOW”.
3. Turn the ignition key to “OFF” to stop the
engine. Remember to remove the key from the
ignition switch.
4. Set the parking brake: refer to Setting the
Parking Brake, page 15.
IMPORTANT: If the machine will be left
unattended, close the fuel shut off valve and
disconnect the wire(s) from the spark plug(s).
POTENTIAL HAZARD
•
Someone could move or attempt to operate
the machine while it is unattended.
WHAT CAN HAPPEN
•
Children or bystanders may be injured if
they use the machine.
HOW TO AVOID THE HAZARD
•
Always remove the ignition key and set the
parking brake when leaving the machine
unattended, even if just for a few minutes.
IMPORTANT: If the machine is loaded on a
truck or trailer for transport, securely
restrain the machine to prevent movement.
POTENTIAL HAZARD
•
Stopping, starting and turning may cause
the machine to move or shift position
during transport.
•
Rough roads may cause the machine to fall
off vehicle or trailer during transport.
WHAT CAN HAPPEN
•
Children or bystanders may be injured.
•
The machine may be damaged.
•
Other property may be damage.
HOW TO AVOID THE HAZARD
•
Always restrain the machine securely
before transporting.